This portable monitor unit connects easily to any high or low pressure compressed air breathing source and monitors air for CO content.

Designed for workers wearing respirators in IDLH or hazardous environments where positive pressure breathing air must always be assured. In the event of an electrical failure, or if the main line air pressure drops below 60 psi, the Auto-Air Breather Box automatically switches to a separate reserve air cylinder.

These portable/fixed Grade-D Filtration Systems are designed to provide breathing air for a specific number of workers. The system filters inlet air to provide repirator users with Grade-D quality air and monitors for the presence of CO.

Point-Of-Attachment (POA) Series provides remote manifold capability for respirator users.

The cost-effective, portable Ambient Air Pump brings clean, breathable air from outside a contaminated environment to a supplied air respirator or hood.

The cost-effective, portable Ambient Air Pump brings clean, breathable air from outside a contaminated environment to a supplied air respirator or hood.

Low-pressure Portable Ambient Air Pumps are designed specifically for use with Type-C Constant Flow Respirators (0-15 psi).

The COOL-BOX provides low-cost cool air anywhere and can operate with any airline Type-C mask or hood-style respirator.

Designed for use with Pressure Demand Respirators only. The first high-pressure portable three-man breathing air compressor that operates on standard 115VAC/60 Hz/20 amp electrical service.

The Multi-Pak series of Small Bottled Air Carts has been designed with the user in mind. Ideal for use in confined space entry, hazmat, fire rescue and by emergency response teams or in water/sewage treatment facilities.

Comes assembled with a pair of 7100 cartridges for organic vapor protection. Ideal for foundries, degreasing, rendering, petrochemical, printing mining, and similar applications. The 7000 Half Mask Respirator is lightweight, with an extra-wide sealing area that provides all-day comfort, leading to increased worker acceptance and compliance. The mask is made of ultra-lightweight, hypoallergenic thermoplastic that’s easy to clean and won’t irritate your skin. A double head strap system includes the ability to release the strap to the drop down position, allowing the mask to hang comfortably around the neck when not needed.

The 5000 Series maintenance-free respirator is designed for comfort and preassembled for convenience.

The 5500 Series Respirator is an economical, reusable respirator that is compatible with North cartridges, filters and accessories, including the Compact Air™ PAPR and the CF2000 Series Continuous Flow Airline Attachment and the BP1002 Series Backpack Adapters.

The Survivair Premier Half Mask Respirator has a high-quality silicone mask that features a soft sealing flange with rolled edges, making it very comfortable to wear.

The Moldex 7000 Reusable Half Mask Respirator is lightweight, with an extra-wide sealing area that provides all-day comfort, leading to increased worker acceptance and compliance. The mask is made of ultra-lightweight, hypoallergenic thermoplastic that’s easy to clean and won’t irritate your skin. A double head strap system includes the ability to release the strap to the drop down position, allowing the mask to hang comfortably around the neck when not needed.

The reusable 6000 Series Half Facepiece does not require extra parts to attach the filters or cartridges directly to the facepiece.

Designed for workers who wear hard hats and need to communicate frequently. A unique head harness system allows wearer to drop the facepiece to his chest without removing his hard hat.

The pliable, soft, textured sealing surfaces of the SoftFeel® facepieces on Comfo Classic Half Mask Respirators come from extensive research.

Comes assembled with a two 7100 cartridges for organic vapor protection, two 8910 N95 particulate prefilters, and two 7020 prefilter retainers. Ideal for painting, pesticide manufacturing, printin, and similar applications. The 7000 Half Mask Respirator is lightweight, with an extra-wide sealing area that provides all-day comfort, leading to increased worker acceptance and compliance. The mask is made of ultra-lightweight, hypoallergenic thermoplastic that’s easy to clean and won’t irritate your skin. A double head strap system includes the ability to release the strap to the drop down position, allowing the mask to hang comfortably around the neck when not needed.

Economical respirator combines low breathing-resistance cartridges with NIOSH-approved protection. The low-cost thermoplastic elastomer facepiece features a soft sealing flange with rolled edges, making it both comfortable and cost-effective.

Comes assembled with a two 7600 multigas cartridges for protection from organic vapors, ammonia, methylamine, chlorine, hydrogen chlorine, sulfur dioxide, chlorine dioxide, hydrogen fluoride, and hydrogen sulfide. Ideal for an extremely wide range of manufacturing and chemical applications. The 7000 Half Mask Respirator is lightweight, with an extra-wide sealing area that provides all-day comfort, leading to increased worker acceptance and compliance. The mask is made of ultra-lightweight, hypoallergenic thermoplastic that’s easy to clean and won’t irritate your skin. A double head strap system includes the ability to release the strap to the drop down position, allowing the mask to hang comfortably around the neck when not needed.

The soft, hypoallergenic facepiece of the 7700 features a contoured sealing flange for a comfortable, secure fit.

The Half Facepiece 7500 Series has state-of-the-art features that provide unsurpassed comfort.

The comfortable 2000 Series Half Mask is made of silicone that stays soft and pliable, even in extreme heat and cold.

Advantage 200 LS Respirator features a facepiece made from a new clear blue formulation of thermoplastic rubber. The new facepiece is 25% lighter and noticeably softer than the previous model.

Comes assembled with a two 7940 P100 filter disks for HEPA level particulate protection against hazards like lead, asbestos, inorganic arsenic, oil-based particulates, and cadmium. The 7000 Half Mask Respirator is lightweight, with an extra-wide sealing area that provides all-day comfort, leading to increased worker acceptance and compliance. The mask is made of ultra-lightweight, hypoallergenic thermoplastic that’s easy to clean and won’t irritate your skin. A double head strap system includes the ability to release the strap to the drop down position, allowing the mask to hang comfortably around the neck when not needed.

Choose from a complete line of bayonet-style air purifying cartridges.

A wide range of filters and cartridges provide versatile protection for 3M 5000, 6000 and 7000 Series Facepieces and Respirators.

The 3M™ Particulate Filter 2097, P100, with Nuisance Level Organic Vapor Relief is 3M recommended for ozone protection up to 10 times the Threshold Limit Value.

North Safety Cartridges and Filters provide respiratory protection against a wide variety of industrial air contaminants.

The 3M Particulate Filter 2091, P100 provides workers with versatile protection, exceptional filter efficiency, durability, economy and simplicity.

3M Cartridge/Filters provide a high level of comfort and exceptional respiratory protection, and offer significant advantages over earlier stacked cartridge/filters.

Choose from a complete line of bayonet-style air purifying cartridges and filters. Easy to attach with a simple one-quarter turn.

Use Advantage Respirator Cartridges in Advantage 200, Advantage 1000 and Advantage 3000 respirators. A wide variety of cartridges are available. Cartridges come two to a pack.

North Safety Cartridges and Filters provide respiratory protection against a wide variety of industrial air contaminants.

These low-profile, flexible filters fit well under a welding hood and with other personal protective equipment.

The following cartridges, filters, and accessories are available for Survivair’s S-Series (threaded) Respirators. Comes in Standard, P100 and multicontaminant cartridge/filter combinations.

The GME Super Cartridge provides protection against ten specific gases and vapors simultaneously. Using a prefilter and a cover adds protection against fumes, mists, dusts, pesticides and paints.

The 3M™Particulate Filter 2071, P95 with Advanced Electret Media technology provides protection in environments where oil, and non-oil based particles are present.

The North Low Profile Filter/Cartridge gives the same P100 protection in a 45% thinner, 60% smaller size.

Choose from the 501 or 502 depending on cartridge and filter type required on the facepiece. For more information 3M.com/Occsafety online.

Bayonet-style air purifying cartridge/filter combinations are easy to attach with a simple one-quarter turn.

The 3M Particulate Filter 5N11, N95 is NIOSH approved and provides protection against certain non-oil containing aerosols. This P-series filter is appropriate for both oil and non-oil containing environments with extended time-use limitations. For use with 3M 6000, 7000, and FF-400 Series Facepieces.

3M 6000 Series Cartridges and Filters are designed for use with 3M Facepieces with bayonet attachments including 6000 Series half and full facepieces, 7500 Series half facepieces, 7800 Series full facepieces, and FF-400 Series facepieces.

North Pancake Filter meets NIOSH class P100 requirements by having a minimum efficiency of 99.97% against dust, mist or fumes, oil or non-oil based aerosols.

Use Comfo Respirator Cartridges and Filters with the Comfo Classic respirator.

The 5400 Series Full Facepiece Air-Purifying Respirator offers the same protection as North’s top-of-the-line 7600 Series™, but at a more economical price. The face seal and nose cup are made from a thermoplastic elastomer (TPE), a lightweight, soft and pliable material that provides comfort and an excellent fit, and is resistant to alcohol, acids and bases. Hypoallergenic.

A full range of NIOSH-approved cartridges and filters are compatible with the 7000 Half Mask Respirator and the 9000 Full Facepiece Respirator.

The Survivair Opti-Fit Respirator combines a high level of performance with a very affordable price, offering features and accessories usually found only in full-face respirators costing twice as much.

The low-maintenance, low-cost, durable Advantage 1000 Full Facepiece Respirator weighs about 40% less than conventional full facepiece respirators.